i.Node series -The i.Node series products are network I/O devices that have adopted the LonWorks flatform (ANSI/EIA/CEA 709.1) and are used exclusively for LonWorks that is a standard for the open distributed control in the industrial automation control sector.
LonWorks-based controlling network can be built by connecting various digital and analog sensors and actuators to the iNode series products, receiving values from the sensors, and controlling the actuators. <<
i.Node PDI8
Product Features
Provides Digital Inpu 8ch
The system¡¯s stability and scalability have been enhanced due to the intelligent distributed control method
Easy to install and maintain as the system is based on a network.
Interactive communication, multi-targeting and multi-controlling are made possible
Digitalized I/O processing due to intelligent devices
Easy to install and manage due to the LNS plug-in program. A user interface is supported.
Product Specifications
Item
Description
Processor Type
PL3150
Transceiver Type
Processor Clock
10MHz
Memory
AT29C512(32K Flash Memory)
Comm. Media
PLC(Power Line Communication)
POWER
100~240 VAC, 50/60Hz
Protocol
ANSI/EIA/CEA 709.1 Lon Talk Protocol,
ANSI/EIA/CEA 709.2 Power Line
Digital Input
Dry-contact, 30VDC Max (0~9V:ON, 9~ :OFF)
Dimension
92(W) x 96(H) x 82(D) mm
Operation
-10~50¡É, 0~85%
Temp./Humidity
Mounting
Wall mount type or Din Rail Base Plate type
Plug-in
Plig-In type
Functions
Digital Input
Select among the digital input detection functions: Direct, One shot, Togle, Pulsed, Override
Digital Output
Set the digital output control functions: Direct, One shot, Togle, PWM, One pulse, Preset, Override
Analog Input
Select among the analog input detection functions : Sensor type and range setting, Filter setting, NV range & offset setting
User table setting, Upper limit/Lower limit alarm setting, Override
Analog Outpt
Set the digital output control functions: Preset table, Input range setting, Scaling, Offset, Override
Loop
Set the PID control function: P/I/D factor setting, and P_bias, Deadband, and I limit setting
Compare
Input NV comparison function: Equal, Not Equal, Greater than equal, Less, And, Or, Or not
Multi Function
Input NV comparison and operation functions: Logic, Encoder, Counter, On time, And, And not, Or, Or not, Equal
Not equal,Greater than equal,Less,Selector,Higher,lower,Add
Sub,Mul,Div,Enthalpy
Analog Control
Input NV comparison and operation functions: Equal, Not equal, Greater than equal, Less, Select, Higher, lower
Logic, Encoder, On time, and Counter functions based on Input NV
General Function Block
General Function Block
HEAD OFFICE : 159, Sayeon-gil, Beomseo-eup, Ulju-gun, Ulsan, Republic of Korea
Tel : +82-25-254-3470~3 / FAX : +82-52-254-3456
COPYRIGHT(C) 2011 BY ADIC.CO.,LTD ALL RIGHTS RESERVED.